Diameter 12 mm
Thread pitch 1,75 mm
Length 180 mm
Base 20 mm
Which axle head do you need for your Croozer thru axle?
“N” axle head: If your Croozer is equipped with the Click & Crooz® system (= grey push button on the hitch connector) and the rear-wheel dropouts on your bicycle frame are flat and not blocked by other parts or components.
“XL” axle head: If your Croozer is equipped with the Click & Crooz® system (= grey push button on the hitch connector) and the rear-wheel dropouts on your bicycle frame are either not flat or blocked by other parts or components.
“A” axle head: Your Croozer is not equipped with the Click & Crooz® system? Then you need the “A” axle head with an adapter for mounting all standard axle hitches.
Diameter 12 mm
Thread pitch 1,75 mm
Length 180 mm (174 mm with Spacer)
Base 10 mm
Which axle head do you need for your Croozer thru axle?
“N” axle head: If your Croozer is equipped with the Click & Crooz® system (= grey push button on the hitch connector) and the rear-wheel dropouts on your bicycle frame are flat and not blocked by other parts or components.
“XL” axle head: If your Croozer is equipped with the Click & Crooz® system (= grey push button on the hitch connector) and the rear-wheel dropouts on your bicycle frame are either not flat or blocked by other parts or components.
“A” axle head: Your Croozer is not equipped with the Click & Crooz® system? Then you need the “A” axle head with an adapter for mounting all standard axle hitches.
Diameter 12 mm
Thread pitch 1,75 mm
Length 180 mm
Base 20 mm
Which axle head do you need for your Croozer thru axle?
“N” axle head: If your Croozer is equipped with the Click & Crooz® system (= grey push button on the hitch connector) and the rear-wheel dropouts on your bicycle frame are flat and not blocked by other parts or components.
“XL” axle head: If your Croozer is equipped with the Click & Crooz® system (= grey push button on the hitch connector) and the rear-wheel dropouts on your bicycle frame are either not flat or blocked by other parts or components.
“A” axle head: Your Croozer is not equipped with the Click & Crooz® system? Then you need the “A” axle head with an adapter for mounting all standard axle hitches.
Thru Axle Adapter 12 - 180 - 1.75 A
Comes with spacer
| . | . |
|---|---|
| Length | L = 180 mm (without spacer) and L = 174 mm (with spacer) |
| Thread Pitch | 1.75 mm, diameter 12 mm |
| Thru Axle (Type) | 12 - 180 - 1.75 A |
Thru Axle Adapter A Manual
Article code: 12 - 180 - 1.75 A (L=180mm / L=174mm). For the attachment of all standard axle hitches.
Store
GUIDE